Design Large Outdoor Water Fountains

0

Large outdoor water fountains – The trick to designing a water source successfully is to keep the inner workings of the fountain hidden from view. Water fountains should look natural and blend in with their surroundings. One way to achieve this effect is by designing a fountain with an underground reservoir. It sounds complicated, but in reality it is quite simple. Your source will rest on the top of this hidden reservoir. Water from the fountain will overflow and collect in the reservoir below. Best of all, you can create this font with the objects that you can have in your house.

Ideas for design large outdoor water fountains. Find a container that will contain water to act as your source base. This can be a large pot or urn. If the vessel does not have a drain hole, use a drill and create a 2-inch diameter hole in the bottom. Dig a hole for the underground basin. The hole should be approximately the same dimensions as the plastic tub you are going to use for the basin. The bathtub should also be wider than its base of the fountain.

Then for design large outdoor water fountains. Cover the container with a piece of wire cloth. The metal screen must be wider than the basin. Once you are satisfied with the placement of the screen, use a pair of scissors to cut and cut a hole in the center. The hole must

Share.

Comments are closed.